Ab-soft ATX 12V Manual de usuario descargar pdf (Pagina 43)

Hardware Installation

SY- P4I865PE Plus DRAGON 2

Onboard LAN LED Definition

Step 5 Power On

You have now completed the hardware installation of your Motherboard

successfully.

1. Turn the power on

2. To enter the BIOS Setup Utility, press the <DEL> key while the system is

performing the diagnostic checks,

Note: If you have failed to enter the BIOS, wait until the boot up

sequence is completed. Then push the RESET button and press

<DEL> key again at the beginning of boot-up, during diagnostic

checks.

When this LED is lit, this

means the LAN is

running at 100 mbps, if i

is not lit, the Onboard

LAN is working at 10

mbps.

This is the LAN activit

LED. It will blink whe

it is active.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 96 97

Sin comentarios

Ab-soft ATX 12V Manual de usuario Pagina 43